Application
Questions
1. What preparation is needed before
applying EXTREME PERFORMANCE COATING?
2. How
long does the application take?
3. Can you apply EXTREME
PERFORMANCE COATING over swollen Hardboard or LP siding?
4. Can
you install over cinderblock?
5. Do you caulk windows, doors
and cracks?
6. Can EXTREME PERFORMANCE
COATING be applied over existing siding?
7. Do you repair
any wood rot before application?
8. How does the EPC process
differ from your advanced paint process?
General
Questions
1. Can I receive an estimate over
the phone or by email?
Unfortunately no. Many variables affect the cost
of the EPC system both positively and negatively. Condition of substrate, absorption
of substrate, amount of detailed work, numbers of windows, doors, columns etc.
all affect cost. Thats why Ultimate Finishes offers completely free, no obligation
inspections and estimates.
[top]
2.
How does the cost compare to vinyl siding?
Typically The EPC system is
equal to or less than vinyl siding.
[top]
3.
Is Extreme Performance Coating resistant to chemicals?
Yes. EPC resists
most household chemicals.
[top]
4.
I have 3 homes that need to be covered. How much of a discount do you offer with
volume pricing?
We do offer substantial volume discounts / rebates. Please
request a free estimate and we will gladly discuss this with you.
5.
What surfaces can EXTREME PERFORMANCE COATING cover?
Although some surfaces require different preparation than others, EPC is formulated
to adhere to virtually any paintable surface.
[top]
6.
How do I receive a quote on EXTREME PERFORMANCE COATING
SYSTEM?
Please call us at (253) 858-1777 or (206)935-3602. Or fill out
this request an estimate form.
[top]
7.
Can it be applied on decking boards?
We do not apply EPC to deck floors
because it is too smooth. However, it is great for handrails and spindles.
[top]
8.
What happens to the wood that is being covered?
EPC will make wood look
newer by concealing small cracks that may have developed with age. It will protect
the wood for years to come. Our technology allows water vapor breath out so as
to prevent rotting. This technology is similar to Gortex in that it breathes one
way, removing
moisture.
[top]
9.
Will EXTREME PERFORMANCE COATING help with insulation
value?
No exterior coating will actually "insulate your home."
The coating would have to be extremely thick and wouldn't look very nice. However
we do go around the home and seal up any cracks, crevices, nail pops etcetera.
According to HUD, air infiltration is the leading cause of heating and cooling
loss. This pre-coating treatment will aid in preventing air infiltration.
[top]
10.
What bonds the EXTREME PERFORMANCE COATING to wood?
After preparation we apply the EPC Bonding Agent. It penetrates the surface and
acts as an adhesive to permanently adhere the EPC.
[top]
11.
What colors are available?
Unlike vinyl siding that is typically offered
in only 7 or 8 colors, EPC is available in over 1800 colors.
12.
How long will EXTREME PERFORMANCE COATING last?
EPC comes with a limited Lifetime, Non Pro-Rated,Transferable Warranty.(See Warranty
for details). EPC is warranted against all of the problems typically associated
with paint and vinyl siding. A warranty will be presented to you for inspection
during your free estimate.
[top]
13.
How thick is the EXTREME PERFORMANCE COATING?
EPC is over 10 times the thickness of ordinary house paint.
[top]
14.
Can you use EXTREME PERFORMANCE COATING on historic
homes that
are in historic districts?
Yes. Not only does our product
restore them to their original splendor, it also protects them forever. Do verify
the legality and rules of your specific Historical District.
[top]
15.
How does EXTREME PERFORMANCE COATING look on Stucco?
When we use EPC on Stucco it still looks like Stucco. If we put it on brick it
still retains the shape and texture of brick. EPC is ideal for the homeowner who
wants to preserve and protect the texture of the home.
[top]
16.
Can it be applied to vertical siding?
Yes. EPC can be applied over any
paintable surface.
[top]
Application
Questions
1. What preparation is needed before
applying EXTREME PERFORMANCE
COATING?
While some surfaces call for unique preparation, typically we start by replacing
any bad siding. Afterward we scrape any peeling paint or growth. Some feather
sanding may be necessary. We then follow with cleaning the surface with a special
chemical that is environmentally safe
and helps to open the pores of the
substrate or previous paint. If mildew is present we treat the area affected with
another environmentally safe chemical that doesn't just whiten the mildew like
chlorine bleach does, but actually kills the mildew for good. After preparation,
the home or building is ready for the bonding process.
[top]
2.
How long does the application take?
While some jobs can be completed in
as little as three days, most homes can be completed within 5 working days.
[top]
3.
Can you apply EXTREME PERFORMANCE COATING over swollen
Hardboard
or LP siding?
We replace any defective siding during our
preparation stage. EPC will coat and waterproof remedied swollen LP siding and
perform much better than paint. However the warranty will be void. In extreme
cases of deterioration we recommend all affected siding be replaced before applying
EPC.
[top]
4. Can
you install over cinderblock?
Yes. Our product looks very nice over cinderblock.
It appears to smooth the sharp edges as well.
[top]
5.
Do you caulk windows, doors and cracks?
Yes. EPC bridges and repairs small
cracks up to 1/8 in. All other cracks and gaps will be sealed with a high quality
elastomeric sealant which expands and contracts with the house to ensure a tighter
seal and less air infiltration.
[top]
6.
Can EXTREME PERFORMANCE COATING be applied over existing
siding?
Yes. In fact, most vinyl or aluminum siding looks better than
it did when it was new.
[top]
7.
Do you repair any wood rot before application?
Yes. It is very important
to have a sound surface to adhere the EPC.
[top]
8.
How does the EPC installation process differ from your paint process?
Please see Permanent coating process.
[top]
